Due to the summer holiday, there will be minimal office staffing and no production between July 28 and August 15, 2025 as maintenance work will be carried out on the machinery during this period.
Meijer Group Meijer Metal Meijer Handling Solutions Meijer Museum
Home Options

Palletstops

Y1

Y1

ReachForks can't be doubled in length as the outer sleeve would slide off the inner forks. Thus, their retracted length is always longer than the stroke. If it exceeds the pallet size, a pallet stop is used to prevent the forks from extending past the pallet's back. A low ± 75 mm Y1 palletstop, is most commonly used for ReachForks mounted on truck-mounted forklifts.
 Y2

Y2

A Y2 pallet stop, 400 mm high, is often used for one-sided truck loading and unloading, as well as for double-deep applications, as it allows for the mounting of a load backrest on top of the pallet stop.
 Y3

Y3

A Y3 pallet stop, 850, 1000, 1200, and 1600 mm high, is often used for one-sided truck loading and unloading, as well as for double-deep applications when a load backrest cannot be used while the ReachForks should be postponed to the inside or outside like on fork positioners.
 Y4

Y4

Sometimes, it is necessary to place a “bumper” on the front of the fork shank if the retracted length is to be the same as the pallet length. Often used with extension forks that can lift two pallets in a row, for example the application cross-docking.
 YD

YD

In more complex handling situations, a customer may need to store pallets in double-deep in a warehouse. In such cases, pallet stops are necessary to ensure that the pallet is placed correctly in the racking. If the same customer uses the ReachForks to handle two pallets in tandem, the retractable pallet stop is withdrawn to create a longer fork.
 Removable-Pallet-Stop

Removable Pallet Stop

A pallet stop may be required for demonstration purposes. In such cases, it can be temporarily installed.

Load Back Rest

LBR-CB

LBR-CB

The load backrest for a Counterbalance forklift is constructed from sturdy tube-section material, creating an exceptionally strong structure. The Load Back Rest is easily mounted onto a Y2 pallet stop type. During installation, the Center To Centre of the ReachForks can be adjusted.
 LBR-RT

LBR-RT

The load backrest for ReachTrucks forklift is constructed from sturdy tube-section material, creating an exceptionally strong structure. The Load Back Rest is easily mounted onto a Y2 pallet stop type. During installation, the Center To Centre of the ReachForks can be adjusted.
 LBR_CAM

LBR-CAM

The load backrest for ReachTrucks forklift is constructed from sturdy tube-section material, creating an exceptionally strong structure. It is easily mounted onto a Y2 pallet stop type. During installation, the Center-to-Centre of the ReachForks can be adjusted, and a camera system, carriage-mounted, can be installed.

Positions Oil Connections

connection-coupling

Oil connections at the back

It's not always possible to route the oil supply to the reach forks through the top, so the connection fittings may need to be placed in another location, such as the back of the forks.
 oil-connection-on-the-side

Oil connection on the side

It's not always possible to route the oil supply to the reach forks through the top, so the connection fittings may need to be placed in another location, such as the side of the forks.
 oil-connection-on-top

Oil connections on top

Often, the oil connections for the oil supply can run through the top of the KOOI® ReachForks, but not always, due to obstacles like side-shift or shaft mounting.

ATEX-Atmosphères EXplosibles

ATEX-Y0

ATEX-Y0

ATEX for forklift attachments refers to equipment designed for explosive atmospheres, compliant with the EU's ATEX directive. These attachments must be certified to prevent sparks or excessive heat during operation.
ATEX-Y2

ATEX-Y2

ATEX for forklift attachments refers to equipment designed for explosive atmospheres, compliant with the EU's ATEX directive. These attachments must be certified to prevent sparks or excessive heat during operation.
extra-wear-plate

Extra wear plate

When telescopic forks are used in environments where they frequently slide over rough floors, an additional wear plate can be installed under the outer sleeves. To further prevent wear on the underside of the outer sleeves, we recommend that the forklift dealer shortens the chain supporting the fork carriage slightly.

mhs-secutex-shank

Protective Coating

Applying a durable protective coating to the ReachForks helps prevent damage to both the forks and delicate loads. The coating reduces wear on the forks and cargo, provides cushioning, and minimizes slippage during handling.
fork-mounting

Fork Mounting

We produce custom solutions for manufacturers
 ReachFork-crown-vna

Special Custom Mounts

We produce custom solutions for manufacturers of lift trucks, fork positioners, and spreaders
 ReachFork-RG4

Terminal West Mounting

We produce custom solutions for manufacturers of lift trucks, fork positioners, and spreaders

Oil Distribution Block

gear-flowdivider

Gear Flowdivider

If more than one set of ReachForks is used on a fork carriage and/or a Multi-Pallet Handler, a Gear Flowdivider is necessary to synchronize the outer sleeves of the reach forks.

We are trusted by the worlds leading companies in
manufacturing, warehousing and logistics:

Do you want to know more about efficient handling solutions?

Ask our experts

Connect and subscribe to our LinkedIn newsletter to stay informed

Connect on LinkedIn

Or follow us on your favorite channel

We’re keen on safety and regulations

The ISO standards are primarily committed to quality, reliability, and precision within various industrial processes. A company adhering to these ISO standards demonstrates its dedication to maintaining high-quality management systems, ensuring robustness in forklift fork manufacturing, and precise contamination control in hydraulic fluids. Such compliance underscores the company's focus on delivering products and services that meet rigorous international benchmarks, improving operational efficiency, minimizing errors, and enhancing customer satisfaction. This commitment not only sets the company apart in terms of product reliability and safety but also reflects its ongoing investment in technological advancements and continuous improvement.

Read more